CN
HTY-DG132 is can quickly and safely remove dissolved gases in water. It offers quick and easy preparation of dissolution media.
Less than 5 minutes from start to use, greatly reducing the preparation time;
No upper limit of water volume, as long as the water source is sufficient, the water can be continuously degassed;
One-click for filling, heating and degassing;
Bigger LCD screen, easy to use;
Self-diagnosis function, when an abnormal situation occurs, the device automatically stop with error message;
Power-off protection function to reduce device damage;
Memory storage function, can remember the last operating parameters;
Temperature compensation and calibration;
User selectable volume settings.
Power supply:（220±10%）VAC, 50Hz
Power consumption: Max. 3500W
Heating temperature, accuracy: 37.0-40.0° C, ±0.5° C
Degassing vacuum: 700mbar-900mbar
Media volume: no limitation, depends on media supply
O2 level after degassing: ≤2.8mg/L
Dispensing rate:＞1000mL/min
Dimensions: 55cm×40cm×59cm
Degassing for distilled water and deionized water
Technical specifications are subject to change without notice. Copyright reserved by Tailin.